ZTE Warp Sequent (N861) vs Wiko Pulp Fab (3G)
Side by side comparison between ZTE Warp Sequent vs Wiko Pulp Fab phones, differences, pros, cons and full specifications. What's the better?
,
4.3"
TFT
TFT
540x960
5
MP
MP
1.3mp
768MB
RAM
RAM
Single-core
1650
mAh
mAh
(Removable)
vs
5.5"
IPS
IPS
720x1280
13
MP
MP
5mp
2GB
RAM
RAM
Octa-core
2820
mAh
mAh
(Removable)
What's the better phone? Wiko Pulp Fab (3G)
The phonemore's choice is much more technical than personal. Therefore, you shouldn't only consider this. Our goal is to help you, but what's important to us may not be important to you. You decide which one is the best! Comment!
1 Advantage 
22 Advantages | 17 Common items in both devices |
| Only digital zoom |
| Autofocus |
| Capacitive |
| Multitouch |
| Accelerometer |
| Ambient light sensor |
| Proximity sensor |
| +10 specs and more in the table below |
Check the comparison table below for more items that are not evaluated in comparison score above.
Highlight differences Clear highlight📱 Model features | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| Change model | ||
| Model | Warp Sequent (N861) | Pulp Fab (3G) |
| Other model names | Boost Mobile ZTE Warp Sequent N861 | Wiko Pulp Fab Octa M907, Wiko Pulp Fab M907 Dual Sim |
| Country or region available |  USA |     Algeria, (Europe), Indonesia, Vietnam |
| Brand | ZTE | Wiko |
| Release date | 9/17/2012 | 10/1/2015 |
| Depth | 9.9 millimeters (0.39 inches) | 8.5 millimeters (0.33 inches) |
| Size (width x height) | 64.8 x 127 millimeters (2.55 x 5 in) | 79.3 x 154.7 millimeters (3.12 x 6.09 in) |
| Weight | 130 grams (4.55 ounces) | 170 grams (5.95 ounces) |
| Build, materials | Plastic body, glass front | feature not registered |
| Protection against water and others | Not supported | Not supported |
📲 Display | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| Display type | TFT LCD | TFT IPS LCD |
| Screen size | 4.3" inches | 5.5" inches |
| Screen-to-body ratio | ~61.9% (screen-to-body ratio) | ~68% (screen-to-body ratio) |
| Display resolution | 540x960 pixels | 720x1280 pixels |
| Touchscreen | Capacitive Multitouch | Capacitive Multitouch |
| Pixel density (dot pitch) | 256 PPI | 267 PPI |
| Colors | 260 thousand | 16 million |
| Scratch-resistant glass | Not supported | Not supported |
| Refresh rate | 60Hz | feature not registered |
| Display features | Not supported | feature not registered |
🤖 Operating System | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| System version | Android 4.0.4 Ice Cream Sandwich ICS | Android 5.1.1 Lollipop |
| Firmware update | feature not registered | feature not registered |
| User Interface | feature not registered | feature not registered |
⚙️ Processor | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| Chipset | 32bit: Qualcomm Snapdragon S2 MSM8655 | 32bit: MediaTek MT6592M |
| CPU | Single-core, 1 processor: 1x 1.4GHz Scorpion (Single-core) | Octa-core, 1 processor: 8x 1.4GHz ARM Cortex-A7 (Octa-core) |
| GPU graphical controller | Qualcomm Adreno 205 | ARM Mali-450 MP4 |
| Performance (benchmark) | feature not registered | feature not registered |
💽 Memory and storage | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| RAM memory | 768MB LPDDR2 | 2GB LPDDR3 |
| Internal storage | 4GB (2.59GB available) | 16GB (10GB available) |
| External storage | Until 32GB microSD, microSDHC (dedicated slot) | Until 64GB microSD, microSDXC (dedicated slot) |
📶 Mobile networks | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| Dual-SIM | Not supported | Dual-SIM Standby - Call active on one sim card (dedicated slot) |
| SIM card | 1 slot (Single-SIM) Not supported | 2 slots (Dual-SIM) micro-SIM (3FF) |
| Maximum Download / Upload | 3.1 Mbps | 21/5.76 Mbps |
| Network technology | 2G, 3G | 2G, 3G |
| Frequency, bands | Expand band details Collapse details | |
| GSM MHz band | Not supported | Quad-Band 850/900/1800/1900 |
| Primary 2G network | CDMA 800/1900 | GSM 850/900/1800/1900 |
| Primary 3G network | CDMA2000 1xEV-DO | UMTS 900/1900/2100 |
| Primary 4G network | Not supported | Not supported |
| Primary 5G network | Not supported | Not supported |
| Primary data network | CDMA2000 EV-DO Rev 0, CDMA2000 EV-DO Rev A | GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+ |
| Secondary 2G network | Not supported | GSM 850/900/1800/1900 |
| Secondary 3G network | Not supported | Not supported |
| Secondary 4G network | Not supported | Not supported |
| Secondary data network | Not supported | GPRS, EDGE |
📷 Camera | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| Back camera (main camera) | 5 megapixels | 13 megapixels |
| Main camera resolution | 2592x1944 pixels | 4128x3096 pixels |
| Video recording (primary) | HD (1280x720) | Full HD (1920x1080) 30 fps |
| Flash | LED flash | LED flash on both cameras |
| Focal aperture | feature not registered | feature not registered |
| Focal length | feature not registered | feature not registered |
| Sensor size | feature not registered | feature not registered |
| Pixel size | feature not registered | feature not registered |
| Autofocus | Autofocus | Autofocus |
| Touch focus | Supported | Supported |
| Image stabilization | EIS: Digital stabilization | feature not registered |
| Zoom | Only digital zoom | Only digital zoom |
| Face/smile detection | Face detection, Smile detection | Face detection, Smile detection |
| BSI sensor | Not supported | Not supported |
| HDR | Not supported | HDR photo only main camera |
| Camera extras | feature not registered | feature not registered |
📸 Front camera | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| Front camera (secondary) | 1.3 megapixels | 5 megapixels |
| Front camera resolution | 1280x1024 pixels | 2592x1944 pixels |
| Video recording (secondary) | Not supported | HD (1280x720) |
| Front flash | Not supported | LED |
| Focal aperture | feature not registered | feature not registered |
| Focal length | feature not registered | feature not registered |
| Sensor size | feature not registered | feature not registered |
| Pixel size | feature not registered | feature not registered |
🔉 Sound and multimedia | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| Loudspeaker | Supported Dolby mobile | Supported |
| Active noise cancellation | 1 microphone | Not supported |
| Radio | Not supported | FM |
| TV | Not supported | Not supported |
| Video formats | MP4, H.264, H.263 | MP4, H.264, H.263 |
| Audio formats | MP3, WAV, eAAC+ | MP3, WAV, eAAC+ |
🔌 Connectivity | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| USB | MicroUSB 2.0 | MicroUSB 2.0 |
| Audio output | 3.5mm jack | 3.5mm jack |
| TV output | Not supported | Not supported |
| Bluetooth | 4.0 + A2DP | 4.0 + A2DP |
| WiFi | 802.11 b/g/n [wifi4] (2.4GHz) WiFi hotspot | 802.11 b/g/n [wifi4] (2.4GHz) WiFi Direct, hotspot |
| DLNA | Not supported | Not supported |
| GPS | A-GPS, GeoTagging | A-GPS, GeoTagging |
| NFC | Not supported | Not supported |
| Infrared port | Not supported | Not supported |
🧭 Sensors | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| Sensors | Accelerometer Ambient light sensor Proximity sensor | Accelerometer Ambient light sensor Compass Proximity sensor |
| Vibrating alert | Supported | Supported |
🔋 Battery | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| Battery type | Li-Ion: lithium-ion (Removable) | LiPo: li-ion polymer (Removable) |
| Battery capacity | 1650 mAh | 2820 mAh |
| Charger, watts | 5W Wired charging | Wired charging |
| Inductive / wireless charging | Not supported | feature not registered |
| Talk time autonomy | 6 hours | 19 hours |
| Standby | 220 hours (9.2 days) | 408 hours (17 days) |
➕ Other features | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| Call control | Voice recorder | Voice dialing, Voice recorder |
| Messaging | SMS (Swype), MMS, E-mail, Push mail | SMS (T9), MMS, E-mail, Push mail |
| Hands-free calling | Supported | Supported |
| Video calling | Supported | Supported |
| Ringtones | Polyphonic and customized | Polyphonic and customized |
| Web browser | HTML, XHTML, HTML5 | HTML, XHTML, HTML5 |
| Antenna | Internal antenna | Internal antenna |
| Qwerty physical keyboard | Not supported | Not supported |
| Miscellaneous | • Colors: Black HAC M4/T4 Java framework | • Colors: Black, White, Chocolate, Blue, Red • USB OTG On-The-Go |
☢️ Radiation rate | ||
| ZTE Warp Sequent (N861) | Wiko Pulp Fab (3G) | |
| SAR 1.6W/kg (USA, Mexico, etc.) | 0.76W/kg (head), 1.23W/kg (body) | feature not registered |
| SAR 2W/kg (Europe, UK, etc.) | feature not registered | 0.25W/kg (head), 0.27W/kg (body) |