Xiaomi Redmi Go (16GB) vs Wiko Pulp Fab (3G)

Share page: Facebook Twitter WhatsApp Share page:

Side by side comparison between Xiaomi Redmi Go vs Wiko Pulp Fab phones, differences, pros, cons and full specifications. What's the better?

3/9/2019 4:04 PM, updated: 5/11/2020 11:05 AM

Compare Wiko Pulp Fab X Xiaomi Redmi Go (16GB) 12Points

Specifications Compare Models Pictures

5"
IPS

720x1280

8
MP

5mp

1GB
RAM

Quad-core

3000
mAh

(Non removable)

07Points Wiko Pulp Fab (3G) Compare Xiaomi Redmi Go X

Specifications Compare Models Pictures

5.5"
IPS

720x1280

13
MP

5mp

2GB
RAM

Octa-core

2820
mAh

(Removable)

What's the better phone? Xiaomi Redmi Go (16GB)

The phonemore's choice is much more technical than personal. Therefore, you shouldn't only consider this. Our goal is to help you, but what's important to us may not be important to you. You decide which one is the best! Comment!

12 Advantages Xiaomi Redmi Go (16GB)	vs	7 Advantages Wiko Pulp Fab (3G)
+16GB (12GB available)20% More internal storage for applications and files	vs	16GB (10GB available)
+Until 128GB microSD, microSDXC100% More external storage for files using memory cards	vs	Until 64GB microSD, microSDXC
+137 grams (4.8 ounces)24% Lighter	vs	170 grams (5.95 ounces)
+8.35 millimeters (0.33 inches)2% Thinner	vs	8.5 millimeters (0.33 inches)
+294 PPI10% Crisper display of text, images and videos because it has more pixels per inch (ppi)	vs	267 PPI
+HDR photo on both camerasAdvantage The HDR technology produced photos with more detail in dark areas	vs	HDR photo only main camera
+Android 8.1 OreoAdvantage Android 8.1 Oreo is newer and safer	vs	Android 5.1.1 Lollipop
+4G LTEAdvantage The 4G LTE network is newer and faster	vs	3G+ HSPA+
+(4G LTE) 150 Mbps6 times Faster for surfing the internet and download files	vs	(3G+ HSPA+) 21 Mbps
+3000 mAh6% Battery - higher amperage (mAh) allows more device usage time, but it also depends on the hardware and use	vs	2820 mAh
+Active noise cancellationAdvantage More noise-canceling microphones allow for better quality in calls and audio for recorded videos	vs	Not supported
+4.1 + A2DPAdvantage Bluetooth 4.1 + A2DP is newer and faster	vs	4.0 + A2DP
1.4GHz 64bit Quad-core (28nm)	vs	+1.4GHz 32bit Octa-core1% More powerful processor, you can open your applications faster
1GB LPDDR3	vs	+2GB LPDDR3100% More RAM memory. Typically more responsive and better for multitasking.
5"	vs	+5.5"10% Larger screen
(back) 8MP	vs	+(back) 13MP60% Higher resolution main camera
LED flash	vs	+LED flash on both camerasAdvantage The LED flash on both cameras helps in dark places or in low light
Not supported	vs	+CompassAdvantage Sensors help you use the device
Li-Ion: lithium-ion (Non removable)	vs	+LiPo: li-ion polymer (Removable)Advantage Removable battery can be replaced easily

23 Common items in both devices

TFT IPS LCD

16 million

720x1280 pixels

Only digital zoom

Autofocus

(front) 5MP

Full HD (1920x1080)

+16 specs and more in the table below

Check the comparison table below for more items that are not evaluated in comparison score above.

Highlight differences

📱 Model features
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
Change model		Choose the model
Model	Redmi Go (16GB)	Pulp Fab (3G)
Other model names	Xiaomi Redmi Go M1903C3GG (Android Go)	Wiko Pulp Fab Octa M907, Wiko Pulp Fab M907 Dual Sim
Country or region available	(Global, International)	Algeria, (Europe), Indonesia, Vietnam
Brand	Xiaomi	Wiko
Release date	2/1/2019	10/1/2015
Depth	8.35 millimeters (0.33 inches)	8.5 millimeters (0.33 inches)
Size (width x height)	70.1 x 140.4 millimeters (2.76 x 5.53 in)	79.3 x 154.7 millimeters (3.12 x 6.09 in)
Weight	137 grams (4.8 ounces)	170 grams (5.95 ounces)
Build, materials	Plastic body, glass front	feature not registered
Protection against water and others	Not supported	Not supported
📲 Display
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
Display type	TFT IPS LCD	TFT IPS LCD
Screen size	5" inches	5.5" inches
Screen-to-body ratio	~70% (screen-to-body ratio)	~68% (screen-to-body ratio)
Display resolution	720x1280 pixels	720x1280 pixels
Touchscreen	Capacitive Multitouch	Capacitive Multitouch
Pixel density (dot pitch)	294 PPI	267 PPI
Colors	16 million	16 million
Scratch-resistant glass	Not supported	Not supported
Refresh rate	feature not registered	feature not registered
Display features	feature not registered	feature not registered
🤖 Operating System
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
System version	Android 8.1 Oreo	Android 5.1.1 Lollipop
Firmware update	feature not registered	feature not registered
User Interface	feature not registered	feature not registered
⚙️ Processor
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
Chipset	64bit: Qualcomm Snapdragon 425 (MSM8917) (28nm)	32bit: MediaTek MT6592M
CPU	Quad-core, 1 processor: 4x 1.4GHz ARM Cortex-A53 (Quad-core)	Octa-core, 1 processor: 8x 1.4GHz ARM Cortex-A7 (Octa-core)
GPU graphical controller	Qualcomm Adreno 308 (500MHz)	ARM Mali-450 MP4
Performance (benchmark)	feature not registered	feature not registered
💽 Memory and storage
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
RAM memory	1GB LPDDR3	2GB LPDDR3
Internal storage	16GB (12GB available) eMMC 5.1	16GB (10GB available)
External storage	Until 128GB microSD, microSDXC (dedicated slot)	Until 64GB microSD, microSDXC (dedicated slot)
📶 Mobile networks
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
Dual-SIM	Dual-SIM Standby - Call active on one sim card (dedicated slot)	Dual-SIM Standby - Call active on one sim card (dedicated slot)
SIM card	2 slots (Dual-SIM) nano-SIM (4FF)	2 slots (Dual-SIM) micro-SIM (3FF)
Maximum Download / Upload	150/50 Mbps	21/5.76 Mbps
Network technology	2G, 3G, 4G	2G, 3G
Frequency, bands	Expand band details Collapse details
GSM MHz band	Quad-Band 850/900/1800/1900	Quad-Band 850/900/1800/1900
Primary 2G network	GSM 850/900/1800/1900	GSM 850/900/1800/1900
Primary 3G network	UMTS 850/900/1700/1900/2100	UMTS 900/1900/2100
Primary 4G network	LTE Cat4 (Bands 1, 2, 3, 4, 5, 7, 8, 20, 28) TD-LTE (Bands 38, 40, 41)	Not supported
Primary 5G network	Not supported	Not supported
Primary data network	GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+, TD-LTE, LTE	GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+
Secondary 2G network	GSM 850/900/1800/1900	GSM 850/900/1800/1900
Secondary 3G network	Not supported	Not supported
Secondary 4G network	Not supported	Not supported
Secondary data network	GPRS, EDGE	GPRS, EDGE
📷 Camera
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
Back camera (main camera)	8 megapixels	13 megapixels
Main camera resolution	3264x2448 pixels	4128x3096 pixels
Video recording (primary)	Full HD (1920x1080) 30 fps	Full HD (1920x1080) 30 fps
Flash	LED flash	LED flash on both cameras
Focal aperture	f/2.0 (aperture)	feature not registered
Focal length	feature not registered	feature not registered
Sensor size	feature not registered	feature not registered
Pixel size	1.12µm pixel	feature not registered
Autofocus	Autofocus	Autofocus
Touch focus	Supported	Supported
Image stabilization	EIS: Digital stabilization	feature not registered
Zoom	Only digital zoom	Only digital zoom
Face/smile detection	Face detection, Smile detection	Face detection, Smile detection
BSI sensor	Not supported	Not supported
HDR	HDR photo on both cameras	HDR photo only main camera
Camera extras	feature not registered	feature not registered
📸 Front camera
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
Front camera (secondary)	5 megapixels	5 megapixels
Front camera resolution	2560x1920 pixels	2592x1944 pixels
Video recording (secondary)	HD (1280x720)	HD (1280x720)
Front flash	Not supported	LED
Focal aperture	f/2.2 (aperture)	feature not registered
Focal length	feature not registered	feature not registered
Sensor size	feature not registered	feature not registered
Pixel size	1.12µm pixel	feature not registered
🔉 Sound and multimedia
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
Loudspeaker	Supported	Supported
Active noise cancellation	2 microphones or more	Not supported
Radio	FM	FM
TV	Not supported	Not supported
Video formats	MP4, H.265, H.264, H.263	MP4, H.264, H.263
Audio formats	MP3, WAV, WMA, eAAC+, FLAC	MP3, WAV, eAAC+
🔌 Connectivity
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
USB	MicroUSB 2.0	MicroUSB 2.0
Audio output	3.5mm jack	3.5mm jack
TV output	Not supported	Not supported
Bluetooth	4.1 + A2DP	4.0 + A2DP
WiFi	802.11 b/g/n [wifi4] (2.4GHz) WiFi Direct, hotspot	802.11 b/g/n [wifi4] (2.4GHz) WiFi Direct, hotspot
DLNA	Not supported	Not supported
GPS	A-GPS, GeoTagging, GLONASS, BeiDou	A-GPS, GeoTagging
NFC	Not supported	Not supported
Infrared port	Not supported	Not supported
🧭 Sensors
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
Sensors	Accelerometer Ambient light sensor Proximity sensor	Accelerometer Ambient light sensor Compass Proximity sensor
Vibrating alert	Supported	Supported
🔋 Battery
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
Battery type	Li-Ion: lithium-ion (Non removable)	LiPo: li-ion polymer (Removable)
Battery capacity	3000 mAh	2820 mAh
Charger, watts	5W (5V/1A) Wired charging	Wired charging
Inductive / wireless charging	feature not registered	feature not registered
Talk time autonomy	12 hours	19 hours
Standby	240 hours (10 days)	408 hours (17 days)
➕ Other features
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
Call control	Voice dialing, Voice recorder	Voice dialing, Voice recorder
Messaging	SMS (T9), MMS, E-mail, Push mail	SMS (T9), MMS, E-mail, Push mail
Hands-free calling	Supported	Supported
Video calling	Supported	Supported
Ringtones	Polyphonic and customized	Polyphonic and customized
Web browser	HTML, XHTML, HTML5	HTML, XHTML, HTML5
Antenna	Internal antenna	Internal antenna
Qwerty physical keyboard	Not supported	Not supported
Miscellaneous	• Colors: Black, Blue • Android Go	• Colors: Black, White, Chocolate, Blue, Red • USB OTG On-The-Go
☢️ Radiation rate
	Redmi Go (16GB)	Wiko Pulp Fab (3G)
SAR 1.6W/kg (USA, Mexico, etc.)	feature not registered	feature not registered
SAR 2W/kg (Europe, UK, etc.)	feature not registered	0.25W/kg (head), 0.27W/kg (body)