Wiko Pulp Fab (4G) vs Samsung Galaxy J3 Prime (SM-J327T)
Side by side comparison between Wiko Pulp Fab vs Samsung Galaxy J3 Prime phones, differences, pros, cons and full specifications. What's the better?
,
5.5"
IPS
IPS
720x1280
13
MP
MP
5mp
2GB
RAM
RAM
Quad-core
2820
mAh
mAh
(Removable)
vs
5"
TFT
TFT
720x1280
5
MP
MP
2mp
1.5GB
RAM
RAM
Quad-core
2600
mAh
mAh
(Removable)
What's the better phone? Wiko Pulp Fab (4G)
The phonemore's choice is much more technical than personal. Therefore, you shouldn't only consider this. Our goal is to help you, but what's important to us may not be important to you. You decide which one is the best! Comment!
21 Common items in both devices |
16GB (10GB available) |
16 million |
720x1280 pixels |
Only digital zoom |
Autofocus |
HDR photo only main camera |
Full HD (1920x1080) |
+14 specs and more in the table below |
Check the comparison table below for more items that are not evaluated in comparison score above.
Highlight differences Clear highlight📱 Model features | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
Model | Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) |
Other model names | Wiko Pulp Fab M951 Dual Sim, Wiko M951 | T-Mobile Galaxy J3 SM-J327TZKATMB (J3 2017) |
Country or region available | (Europe), Senegal, Thailand | USA |
Brand | Wiko | Samsung |
Release date | 11/1/2015 | 1/6/2017 |
Depth | 8.5 millimeters (0.33 inches) | 8.7 millimeters (0.34 inches) |
Size (width x height) | 79.3 x 154.7 millimeters (3.12 x 6.09 in) | 70.1 x 140.9 millimeters (2.76 x 5.55 in) |
Weight | 168 grams (5.88 ounces) | 147 grams (5.15 ounces) |
Build, materials | feature not registered | feature not registered |
Protection against water and others | Not supported | Not supported |
📲 Display | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
Display type | TFT IPS LCD | TFT LCD |
Screen size | 5.5" inches | 5" inches |
Screen-to-body ratio | ~68% (screen-to-body ratio) | ~69.8% (screen-to-body ratio) |
Display resolution | 720x1280 pixels | 720x1280 pixels |
Touchscreen | Capacitive Multitouch | Capacitive Multitouch |
Pixel density (dot pitch) | 267 PPI | 294 PPI |
Colors | 16 million | 16 million |
Scratch-resistant glass | Not supported | Not supported |
Refresh rate | feature not registered | feature not registered |
Display features | feature not registered | feature not registered |
🤖 Operating System | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
System version | Android 5.1.1 Lollipop | Android 7.0 Nougat |
Firmware update | feature not registered | feature not registered |
User Interface | feature not registered | feature not registered |
⚙️ Processor | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
Chipset | 64bit: Qualcomm Snapdragon 410 MSM8916 (28nm) | 64bit: Qualcomm Snapdragon 425 MSM8917 (28nm) |
CPU | Quad-core, 1 processor: 4x 1.2GHz ARM Cortex-A53 (Quad-core) | Quad-core, 1 processor: 4x 1.4GHz ARM Cortex-A53 (Quad-core) |
GPU graphical controller | Qualcomm Adreno 306 450Mhz | Qualcomm Adreno 308 500Mhz |
Performance (benchmark) | feature not registered | feature not registered |
💽 Memory and storage | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
RAM memory | 2GB LPDDR3 | 1.5GB LPDDR3 |
Internal storage | 16GB (10GB available) eMMC 4.5 | 16GB (10GB available) |
External storage | Until 64GB microSD, microSDXC (dedicated slot) | Until 256GB microSD, microSDXC (dedicated slot) |
📶 Mobile networks | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
Dual-SIM | Dual-SIM Standby - Call active on one sim card (dedicated slot) | Not supported |
SIM card | 2 slots (Dual-SIM) micro-SIM (3FF) | 1 slot (Single-SIM) nano-SIM (4FF) |
Maximum Download / Upload | 150/50 Mbps | 150/50 Mbps |
Network technology | 2G, 3G, 4G | 2G, 3G, 4G |
Frequency, bands | Expand band details Collapse details | |
GSM MHz band | Quad-Band 850/900/1800/1900 | Quad-Band 850/900/1800/1900 |
Primary 2G network | GSM 850/900/1800/1900 | GSM 850/900/1800/1900 |
Primary 3G network | UMTS 900/1900/2100 | UMTS 850/1700/1900 |
Primary 4G network | LTE Cat4 800/1800/2100/2600 (Bands 1,3,7,20) | LTE Cat4 (Bands 2,4,5,12) |
Primary 5G network | Not supported | Not supported |
Primary data network | GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+, LTE | GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+, LTE |
Secondary 2G network | GSM 850/900/1800/1900 | Not supported |
Secondary 3G network | Not supported | Not supported |
Secondary 4G network | Not supported | Not supported |
Secondary data network | GPRS, EDGE | Not supported |
📷 Camera | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
Back camera (main camera) | 13 megapixels | 5 megapixels |
Main camera resolution | 4128x3096 pixels | 2592x1944 pixels |
Video recording (primary) | Full HD (1920x1080) 30 fps | Full HD (1920x1080) 30 fps |
Flash | LED flash on both cameras | LED flash |
Focal aperture | feature not registered | f/1.9 (aperture) |
Focal length | feature not registered | feature not registered |
Sensor size | feature not registered | feature not registered |
Pixel size | feature not registered | feature not registered |
Autofocus | Autofocus | Autofocus |
Touch focus | Supported | Supported |
Image stabilization | feature not registered | EIS: Digital stabilization |
Zoom | Only digital zoom | Only digital zoom |
Face/smile detection | Face detection, Smile detection | Face detection, Smile detection |
BSI sensor | Not supported | Not supported |
HDR | HDR photo only main camera | HDR photo only main camera |
Camera extras | feature not registered | feature not registered |
📸 Front camera | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
Front camera (secondary) | 5 megapixels | 2 megapixels |
Front camera resolution | 2592x1944 pixels | 1600x1200 pixels |
Video recording (secondary) | HD (1280x720) | VGA (640x480) |
Front flash | LED | Not supported |
Focal aperture | feature not registered | f/2.2 (aperture) |
Focal length | feature not registered | feature not registered |
Sensor size | feature not registered | feature not registered |
Pixel size | feature not registered | feature not registered |
🔉 Sound and multimedia | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
Loudspeaker | Supported | Supported |
Active noise cancellation | Not supported | 2 microphones or more |
Radio | FM | FM (RDS) |
TV | Not supported | Not supported |
Video formats | MP4, H.264, H.263 | MP4, H.264, H.263, MKV, WMV |
Audio formats | MP3, WAV, eAAC+ | MP3, WAV, WMA, eAAC+, FLAC |
🔌 Connectivity | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
USB | MicroUSB 2.0 | MicroUSB 2.0 |
Audio output | 3.5mm jack | 3.5mm jack |
TV output | Not supported | Not supported |
Bluetooth | 4.0 + A2DP | 4.2 + A2DP |
WiFi | 802.11 b/g/n [wifi4] (2.4GHz) WiFi Direct, hotspot | 802.11 a/b/g/n [wifi4] (2.4GHz, 5GHz) + MIMO WiFi Direct, hotspot |
DLNA | Not supported | Not supported |
GPS | A-GPS, GeoTagging | A-GPS, GeoTagging, GLONASS |
NFC | Not supported | Not supported |
Infrared port | Not supported | Not supported |
🧭 Sensors | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
Sensors | Accelerometer Ambient light sensor Compass Proximity sensor | Accelerometer Compass Gyroscope Proximity sensor |
Vibrating alert | Supported | Supported |
🔋 Battery | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
Battery type | LiPo: li-ion polymer (Removable) | Li-Ion: lithium-ion (Removable) |
Battery capacity | 2820 mAh | 2600 mAh |
Charger, watts | Wired charging | Wired charging |
Inductive / wireless charging | feature not registered | feature not registered |
Talk time autonomy | 20 hours | 9 hours |
Standby | 259 hours (10.8 days) | feature not registered |
➕ Other features | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
Call control | Voice dialing, Voice recorder | Voice dialing, Voice recorder |
Messaging | SMS (T9), MMS, E-mail, Push mail | SMS (T9), MMS, E-mail, Push mail |
Hands-free calling | Supported | Supported |
Video calling | Supported | Supported |
Ringtones | Polyphonic and customized | Polyphonic and customized |
Web browser | HTML, XHTML, HTML5 | HTML, XHTML, HTML5 |
Antenna | Internal antenna | Internal antenna |
Qwerty physical keyboard | Not supported | Not supported |
Miscellaneous | • Colors: Black, White, Chocolate, Blue, Red • USB OTG On-The-Go | • Colors: Black • USB OTG On-The-Go |
☢️ Radiation rate | ||
Wiko Pulp Fab (4G) | Galaxy J3 Prime (SM-J327T) | |
SAR 1.6W/kg (USA, Mexico, etc.) | feature not registered | 0.73W/kg (head), 1.4W/kg (body) |
SAR 2W/kg (Europe, UK, etc.) | 0.38W/kg (head), 0.97W/kg (body) | feature not registered |