Panasonic Eluga DL1 vs Wiko Pulp Fab (3G)
Side by side comparison between Panasonic Eluga DL1 vs Wiko Pulp Fab phones, differences, pros, cons and full specifications. What's the better?
,
4.3"
AMOLED
AMOLED
540x960
8
MP
MP
1GB
RAM
RAM
Dual-core
1150
mAh
mAh
(Non removable)
vs
5.5"
IPS
IPS
720x1280
13
MP
MP
5mp
2GB
RAM
RAM
Octa-core
2820
mAh
mAh
(Removable)
What's the better phone? Wiko Pulp Fab (3G)
The phonemore's choice is much more technical than personal. Therefore, you shouldn't only consider this. Our goal is to help you, but what's important to us may not be important to you. You decide which one is the best! Comment!
7 Advantages 
20 Advantages | 17 Common items in both devices |
| 16 million |
| Only digital zoom |
| Autofocus |
| 3G+ HSPA+ |
| 21 Mbps |
| Capacitive |
| Multitouch |
| +10 specs and more in the table below |
Check the comparison table below for more items that are not evaluated in comparison score above.
Highlight differences Clear highlight📱 Model features | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| Change model | ||
| Model | Eluga DL1 | Pulp Fab (3G) |
| Other model names | Panasonic ELUGA, Panasonic EB-3901 | Wiko Pulp Fab Octa M907, Wiko Pulp Fab M907 Dual Sim |
| Country or region available |  (Global, International) |     Algeria, (Europe), Indonesia, Vietnam |
| Brand | Panasonic | Wiko |
| Release date | 2/20/2012 | 10/1/2015 |
| Depth | 7.8 millimeters (0.31 inches) | 8.5 millimeters (0.33 inches) |
| Size (width x height) | 62 x 123 millimeters (2.44 x 4.84 in) | 79.3 x 154.7 millimeters (3.12 x 6.09 in) |
| Weight | 103 grams (3.61 ounces) | 170 grams (5.95 ounces) |
| Build, materials | Plastic body, glass front | feature not registered |
| Protection against water and others | IP57 certified: dust/water resistant up to 1 meter and 30min | Not supported |
📲 Display | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| Display type | AMOLED | TFT IPS LCD |
| Screen size | 4.3" inches | 5.5" inches |
| Screen-to-body ratio | ~66.8% (screen-to-body ratio) | ~68% (screen-to-body ratio) |
| Display resolution | 540x960 pixels | 720x1280 pixels |
| Touchscreen | Capacitive Multitouch | Capacitive Multitouch |
| Pixel density (dot pitch) | 256 PPI | 267 PPI |
| Colors | 16 million | 16 million |
| Scratch-resistant glass | Not supported | Not supported |
| Refresh rate | 60Hz | feature not registered |
| Display features | Not supported | feature not registered |
🤖 Operating System | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| System version | Android 2.3.6 Gingerbread | Android 5.1.1 Lollipop |
| Firmware update | Android 4.0.4 Ice Cream Sandwich ICS | feature not registered |
| User Interface | feature not registered | feature not registered |
⚙️ Processor | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| Chipset | 32bit: Texas Instruments OMAP 4430 (45nm) | 32bit: MediaTek MT6592M |
| CPU | Dual-core, 1 processor: 2x 1GHz ARM Cortex-A9 (Dual-core) | Octa-core, 1 processor: 8x 1.4GHz ARM Cortex-A7 (Octa-core) |
| GPU graphical controller | PowerVR SGX540 MP1 (365MHz) | ARM Mali-450 MP4 |
| Performance (benchmark) | feature not registered | feature not registered |
💽 Memory and storage | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| RAM memory | 1GB LPDDR2 | 2GB LPDDR3 |
| Internal storage | 8GB (5GB available) | 16GB (10GB available) |
| External storage | Not supported | Until 64GB microSD, microSDXC (dedicated slot) |
📶 Mobile networks | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| Dual-SIM | Not supported | Dual-SIM Standby - Call active on one sim card (dedicated slot) |
| SIM card | 1 slot (Single-SIM) micro-SIM (3FF) | 2 slots (Dual-SIM) micro-SIM (3FF) |
| Maximum Download / Upload | 21/5.76 Mbps | 21/5.76 Mbps |
| Network technology | 2G, 3G | 2G, 3G |
| Frequency, bands | Expand band details Collapse details | |
| GSM MHz band | Quad-Band 850/900/1800/1900 | Quad-Band 850/900/1800/1900 |
| Primary 2G network | GSM 850/900/1800/1900 | GSM 850/900/1800/1900 |
| Primary 3G network | UMTS 900/2100 | UMTS 900/1900/2100 |
| Primary 4G network | Not supported | Not supported |
| Primary 5G network | Not supported | Not supported |
| Primary data network | GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+ | GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+ |
| Secondary 2G network | Not supported | GSM 850/900/1800/1900 |
| Secondary 3G network | Not supported | Not supported |
| Secondary 4G network | Not supported | Not supported |
| Secondary data network | Not supported | GPRS, EDGE |
📷 Camera | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| Back camera (main camera) | 8 megapixels | 13 megapixels |
| Main camera resolution | 3264x2448 pixels | 4128x3096 pixels |
| Video recording (primary) | HD (1280x720) 30 fps | Full HD (1920x1080) 30 fps |
| Flash | Not supported | LED flash on both cameras |
| Focal aperture | feature not registered | feature not registered |
| Focal length | feature not registered | feature not registered |
| Sensor size | feature not registered | feature not registered |
| Pixel size | feature not registered | feature not registered |
| Autofocus | Autofocus | Autofocus |
| Touch focus | Supported | Supported |
| Image stabilization | EIS: Digital stabilization | feature not registered |
| Zoom | Only digital zoom | Only digital zoom |
| Face/smile detection | Smile detection | Face detection, Smile detection |
| BSI sensor | Not supported | Not supported |
| HDR | Not supported | HDR photo only main camera |
| Camera extras | feature not registered | feature not registered |
📸 Front camera | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| Front camera (secondary) | Not supported | 5 megapixels |
| Front camera resolution | Not supported | 2592x1944 pixels |
| Video recording (secondary) | Not supported | HD (1280x720) |
| Front flash | Not supported | LED |
| Focal aperture | feature not registered | feature not registered |
| Focal length | feature not registered | feature not registered |
| Sensor size | feature not registered | feature not registered |
| Pixel size | feature not registered | feature not registered |
🔉 Sound and multimedia | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| Loudspeaker | Mono sound (not stereo) | Supported |
| Active noise cancellation | 2 microphones | Not supported |
| Radio | Not supported | FM |
| TV | Not supported | Not supported |
| Video formats | MP4, DivX, H.264, H.263 | MP4, H.264, H.263 |
| Audio formats | MP3, WAV, AC3, eAAC+ | MP3, WAV, eAAC+ |
🔌 Connectivity | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| USB | MicroUSB 2.0 | MicroUSB 2.0 |
| Audio output | 3.5mm jack | 3.5mm jack |
| TV output | Not supported | Not supported |
| Bluetooth | 2.1 + A2DP | 4.0 + A2DP |
| WiFi | 802.11 b/g/n [wifi4] (2.4GHz) WiFi hotspot | 802.11 b/g/n [wifi4] (2.4GHz) WiFi Direct, hotspot |
| DLNA | Supported | Not supported |
| GPS | A-GPS, GeoTagging | A-GPS, GeoTagging |
| NFC | Supported | Not supported |
| Infrared port | Not supported | Not supported |
🧭 Sensors | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| Sensors | Accelerometer Ambient light sensor Compass Proximity sensor | Accelerometer Ambient light sensor Compass Proximity sensor |
| Vibrating alert | Supported | Supported |
🔋 Battery | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| Battery type | Li-Ion: lithium-ion (Non removable) | LiPo: li-ion polymer (Removable) |
| Battery capacity | 1150 mAh | 2820 mAh |
| Charger, watts | Wired charging | Wired charging |
| Inductive / wireless charging | Not supported | feature not registered |
| Talk time autonomy | 4 hours | 19 hours |
| Standby | 300 hours (12.5 days) | 408 hours (17 days) |
➕ Other features | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| Call control | Voice dialing, Voice recorder | Voice dialing, Voice recorder |
| Messaging | SMS (T9), MMS, E-mail, Push mail | SMS (T9), MMS, E-mail, Push mail |
| Hands-free calling | Supported | Supported |
| Video calling | Not supported | Supported |
| Ringtones | Polyphonic and customized | Polyphonic and customized |
| Web browser | HTML, XHTML, Flash player | HTML, XHTML, HTML5 |
| Antenna | Internal antenna | Internal antenna |
| Qwerty physical keyboard | Not supported | Not supported |
| Miscellaneous | • Colors: Black, Silver Java framework | • Colors: Black, White, Chocolate, Blue, Red • USB OTG On-The-Go |
☢️ Radiation rate | ||
| Panasonic Eluga DL1 | Wiko Pulp Fab (3G) | |
| SAR 1.6W/kg (USA, Mexico, etc.) | feature not registered | feature not registered |
| SAR 2W/kg (Europe, UK, etc.) | feature not registered | 0.25W/kg (head), 0.27W/kg (body) |