Meizu MX3 (32GB) vs Wiko Pulp Fab (3G)
Side by side comparison between Meizu MX3 vs Wiko Pulp Fab phones, differences, pros, cons and full specifications. What's the better?
,
5.1"
TFT
TFT
1080x1800
8
MP
MP
2.1mp
2GB
RAM
RAM
Octa-core
2400
mAh
mAh
(Non removable)
vs
5.5"
IPS
IPS
720x1280
13
MP
MP
5mp
2GB
RAM
RAM
Octa-core
2820
mAh
mAh
(Removable)
What's the better phone? Wiko Pulp Fab (3G)
The phonemore's choice is much more technical than personal. Therefore, you shouldn't only consider this. Our goal is to help you, but what's important to us may not be important to you. You decide which one is the best! Comment!
9 Advantages 
14 Advantages | 22 Common items in both devices |
| 2GB LPDDR3 |
| 16 million |
| Only digital zoom |
| Autofocus |
| HDR photo only main camera |
| Full HD (1920x1080) |
| 3G+ HSPA+ |
| +15 specs and more in the table below |
Check the comparison table below for more items that are not evaluated in comparison score above.
Highlight differences Clear highlight📱 Model features | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| Model | MX3 (32GB) | Pulp Fab (3G) |
| Other model names | Meizu MX3 M055, Meizu MX-3, Meizu MX 3 | Wiko Pulp Fab Octa M907, Wiko Pulp Fab M907 Dual Sim |
| Country or region available | feature not registered |     Algeria, (Europe), Indonesia, Vietnam |
| Brand | Meizu | Wiko |
| Release date | 11/1/2013 | 10/1/2015 |
| Depth | 9.1 millimeters (0.36 inches) | 8.5 millimeters (0.33 inches) |
| Size (width x height) | 71.9 x 139 millimeters (2.83 x 5.47 in) | 79.3 x 154.7 millimeters (3.12 x 6.09 in) |
| Weight | 143 grams (5.01 ounces) | 170 grams (5.95 ounces) |
| Build, materials | feature not registered | feature not registered |
| Protection against water and others | Not supported | Not supported |
📲 Display | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| Display type | TFT LCD | TFT IPS LCD |
| Screen size | 5.1" inches | 5.5" inches |
| Screen-to-body ratio | ~74.1% (screen-to-body ratio) | ~68% (screen-to-body ratio) |
| Display resolution | 1080x1800 pixels | 720x1280 pixels |
| Touchscreen | Capacitive Multitouch | Capacitive Multitouch |
| Pixel density (dot pitch) | 412 PPI | 267 PPI |
| Colors | 16 million | 16 million |
| Scratch-resistant glass | Gorilla Glass 3 | Not supported |
| Refresh rate | feature not registered | feature not registered |
| Display features | feature not registered | feature not registered |
🤖 Operating System | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| System version | Android 4.2.2 Jelly Bean | Android 5.1.1 Lollipop |
| Firmware update | Android 4.4.2 KitKat | feature not registered |
| User Interface | feature not registered | feature not registered |
⚙️ Processor | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| Chipset | 32bit: Samsung Exynos 5 Octa 5410 (28nm) | 32bit: MediaTek MT6592M |
| CPU | Octa-core, 2 processors: 4x 1.6GHz ARM Cortex-A15 (Quad-core) 4x 1.2GHz ARM Cortex-A7 (Quad-core) | Octa-core, 1 processor: 8x 1.4GHz ARM Cortex-A7 (Octa-core) |
| GPU graphical controller | PowerVR SGX544 MP3 | ARM Mali-450 MP4 |
| Performance (benchmark) | feature not registered | feature not registered |
💽 Memory and storage | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| RAM memory | 2GB LPDDR3 | 2GB LPDDR3 |
| Internal storage | 32GB (25GB available) | 16GB (10GB available) |
| External storage | Not supported | Until 64GB microSD, microSDXC (dedicated slot) |
📶 Mobile networks | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| Dual-SIM | Not supported | Dual-SIM Standby - Call active on one sim card (dedicated slot) |
| SIM card | 1 slot (Single-SIM) micro-SIM (3FF) | 2 slots (Dual-SIM) micro-SIM (3FF) |
| Maximum Download / Upload | 21/5.76 Mbps | 21/5.76 Mbps |
| Network technology | 2G, 3G | 2G, 3G |
| Frequency, bands | Expand band details Collapse details | |
| GSM MHz band | Quad-Band 850/900/1800/1900 | Quad-Band 850/900/1800/1900 |
| Primary 2G network | GSM 850/900/1800/1900 | GSM 850/900/1800/1900 |
| Primary 3G network | UMTS 850/2100 | UMTS 900/1900/2100 |
| Primary 4G network | Not supported | Not supported |
| Primary 5G network | Not supported | Not supported |
| Primary data network | GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+ | GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+ |
| Secondary 2G network | Not supported | GSM 850/900/1800/1900 |
| Secondary 3G network | Not supported | Not supported |
| Secondary 4G network | Not supported | Not supported |
| Secondary data network | Not supported | GPRS, EDGE |
📷 Camera | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| Back camera (main camera) | 8 megapixels | 13 megapixels |
| Main camera resolution | 3264x2448 pixels | 4128x3096 pixels |
| Video recording (primary) | Full HD (1920x1080) 30 fps | Full HD (1920x1080) 30 fps |
| Flash | LED flash | LED flash on both cameras |
| Focal aperture | f/2.0 (aperture) | feature not registered |
| Focal length | feature not registered | feature not registered |
| Sensor size | feature not registered | feature not registered |
| Pixel size | feature not registered | feature not registered |
| Autofocus | Autofocus | Autofocus |
| Touch focus | Supported | Supported |
| Image stabilization | feature not registered | feature not registered |
| Zoom | Only digital zoom | Only digital zoom |
| Face/smile detection | Face detection, Smile detection | Face detection, Smile detection |
| BSI sensor | Not supported | Not supported |
| HDR | HDR photo only main camera | HDR photo only main camera |
| Camera extras | feature not registered | feature not registered |
📸 Front camera | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| Front camera (secondary) | 2.1 megapixels | 5 megapixels |
| Front camera resolution | 1920x1080 pixels | 2592x1944 pixels |
| Video recording (secondary) | Full HD (1920x1080) | HD (1280x720) |
| Front flash | Not supported | LED |
| Focal aperture | feature not registered | feature not registered |
| Focal length | feature not registered | feature not registered |
| Sensor size | feature not registered | feature not registered |
| Pixel size | feature not registered | feature not registered |
🔉 Sound and multimedia | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| Loudspeaker | Supported | Supported |
| Active noise cancellation | 2 microphones or more | Not supported |
| Radio | Not supported | FM |
| TV | Not supported | Not supported |
| Video formats | MP4, H.264, H.263 | MP4, H.264, H.263 |
| Audio formats | MP3, WAV, eAAC+, FLAC | MP3, WAV, eAAC+ |
🔌 Connectivity | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| USB | MicroUSB 2.0 | MicroUSB 2.0 |
| Audio output | 3.5mm jack | 3.5mm jack |
| TV output | Micro-B USB MHL | Not supported |
| Bluetooth | 4.0 + A2DP | 4.0 + A2DP |
| WiFi | 802.11 a/b/g/n [wifi4] (2.4GHz, 5GHz) | 802.11 b/g/n [wifi4] (2.4GHz) WiFi Direct, hotspot |
| DLNA | Not supported | Not supported |
| GPS | A-GPS, GeoTagging, GLONASS | A-GPS, GeoTagging |
| NFC | Supported | Not supported |
| Infrared port | Not supported | Not supported |
🧭 Sensors | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| Sensors | Accelerometer Ambient light sensor Compass Gyroscope Proximity sensor | Accelerometer Ambient light sensor Compass Proximity sensor |
| Vibrating alert | Supported | Supported |
🔋 Battery | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| Battery type | LiPo: li-ion polymer (Non removable) | LiPo: li-ion polymer (Removable) |
| Battery capacity | 2400 mAh | 2820 mAh |
| Charger, watts | Wired charging | Wired charging |
| Inductive / wireless charging | feature not registered | feature not registered |
| Talk time autonomy | 14 hours | 19 hours |
| Standby | 393 hours (16.4 days) | 408 hours (17 days) |
➕ Other features | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| Call control | Voice dialing, Voice recorder | Voice dialing, Voice recorder |
| Messaging | SMS (T9), MMS, E-mail, Push mail | SMS (T9), MMS, E-mail, Push mail |
| Hands-free calling | Supported | Supported |
| Video calling | Supported | Supported |
| Ringtones | Polyphonic and customized | Polyphonic and customized |
| Web browser | HTML, XHTML | HTML, XHTML, HTML5 |
| Antenna | Internal antenna | Internal antenna |
| Qwerty physical keyboard | Not supported | Not supported |
| Miscellaneous | • Colors: Black, White • USB OTG On-The-Go • Flyme OS 3.0 UI • Sony IMX179 sensor camera • Chinese and English languages • WiFi direct | • Colors: Black, White, Chocolate, Blue, Red • USB OTG On-The-Go |
☢️ Radiation rate | ||
| Meizu MX3 (32GB) | Wiko Pulp Fab (3G) | |
| SAR 1.6W/kg (USA, Mexico, etc.) | feature not registered | feature not registered |
| SAR 2W/kg (Europe, UK, etc.) | feature not registered | 0.25W/kg (head), 0.27W/kg (body) |