Kyocera Torque XT (E6715) vs Wiko Pulp Fab (3G)
Side by side comparison between Kyocera Torque XT vs Wiko Pulp Fab phones, differences, pros, cons and full specifications. What's the better?
,
vs
5.5"
IPS
IPS
720x1280
13
MP
MP
5mp
2GB
RAM
RAM
Octa-core
2820
mAh
mAh
(Removable)
What's the better phone? Wiko Pulp Fab (3G)
The phonemore's choice is much more technical than personal. Therefore, you shouldn't only consider this. Our goal is to help you, but what's important to us may not be important to you. You decide which one is the best! Comment!
7 Advantages 
16 Advantages | 22 Common items in both devices |
| TFT IPS LCD |
| 16 million |
| Only digital zoom |
| Autofocus |
| HDR photo only main camera |
| Full HD (1920x1080) |
| Capacitive |
| +15 specs and more in the table below |
Check the comparison table below for more items that are not evaluated in comparison score above.
Highlight differences Clear highlight📱 Model features | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| Change model | ||
| Model | Torque XT (E6715) | Pulp Fab (3G) |
| Other model names | Kyocera TorqueXT E6715, Kyocera Torque 2 | Wiko Pulp Fab Octa M907, Wiko Pulp Fab M907 Dual Sim |
| Country or region available | feature not registered |     Algeria, (Europe), Indonesia, Vietnam |
| Brand | Kyocera | Wiko |
| Release date | 10/17/2014 | 10/1/2015 |
| Depth | 12.9 millimeters (0.51 inches) | 8.5 millimeters (0.33 inches) |
| Size (width x height) | 68.4 x 128.5 millimeters (2.69 x 5.06 in) | 79.3 x 154.7 millimeters (3.12 x 6.09 in) |
| Weight | 168 grams (5.88 ounces) | 170 grams (5.95 ounces) |
| Build, materials | feature not registered | feature not registered |
| Protection against water and others | Waterproof (IP?) | Not supported |
📲 Display | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| Display type | TFT IPS LCD | TFT IPS LCD |
| Screen size | 4" inches | 5.5" inches |
| Screen-to-body ratio | ~51.8% (screen-to-body ratio) | ~68% (screen-to-body ratio) |
| Display resolution | 480x800 pixels | 720x1280 pixels |
| Touchscreen | Capacitive Multitouch | Capacitive Multitouch |
| Pixel density (dot pitch) | 233 PPI | 267 PPI |
| Colors | 16 million | 16 million |
| Scratch-resistant glass | Scratch-resistant glass | Not supported |
| Refresh rate | feature not registered | feature not registered |
| Display features | feature not registered | feature not registered |
🤖 Operating System | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| System version | Android 4.4.2 KitKat | Android 5.1.1 Lollipop |
| Firmware update | feature not registered | feature not registered |
| User Interface | feature not registered | feature not registered |
⚙️ Processor | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| Chipset | 32bit | 32bit: MediaTek MT6592M |
| CPU | Dual-core, 1 processor: 2x 1.2GHz Qualcomm Snapdragon S4 MSM8960 Lite (Dual-core) | Octa-core, 1 processor: 8x 1.4GHz ARM Cortex-A7 (Octa-core) |
| GPU graphical controller | Qualcomm Adreno 225 | ARM Mali-450 MP4 |
| Performance (benchmark) | feature not registered | feature not registered |
💽 Memory and storage | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| RAM memory | 1GB LPDDR2 | 2GB LPDDR3 |
| Internal storage | 4GB (2GB available) | 16GB (10GB available) |
| External storage | Until 32GB microSD, microSDHC (dedicated slot) | Until 64GB microSD, microSDXC (dedicated slot) |
📶 Mobile networks | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| Dual-SIM | Not supported | Dual-SIM Standby - Call active on one sim card (dedicated slot) |
| SIM card | 1 slot (Single-SIM) Standard mini-SIM (2FF) | 2 slots (Dual-SIM) micro-SIM (3FF) |
| Maximum Download / Upload | 100/50 Mbps | 21/5.76 Mbps |
| Network technology | 2G, 3G, 4G | 2G, 3G |
| Frequency, bands | Expand band details Collapse details | |
| GSM MHz band | Not supported | Quad-Band 850/900/1800/1900 |
| Primary 2G network | CDMA 800/1900 | GSM 850/900/1800/1900 |
| Primary 3G network | CDMA2000 1xEV-DO | UMTS 900/1900/2100 |
| Primary 4G network | LTE 1900 | Not supported |
| Primary 5G network | Not supported | Not supported |
| Primary data network | CDMA2000 EV-DO Rev A, LTE, LTE-A | GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+ |
| Secondary 2G network | Not supported | GSM 850/900/1800/1900 |
| Secondary 3G network | Not supported | Not supported |
| Secondary 4G network | Not supported | Not supported |
| Secondary data network | Not supported | GPRS, EDGE |
📷 Camera | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| Back camera (main camera) | 5 megapixels | 13 megapixels |
| Main camera resolution | 2592x1944 pixels | 4128x3096 pixels |
| Video recording (primary) | Full HD (1920x1080) | Full HD (1920x1080) 30 fps |
| Flash | LED flash | LED flash on both cameras |
| Focal aperture | feature not registered | feature not registered |
| Focal length | feature not registered | feature not registered |
| Sensor size | feature not registered | feature not registered |
| Pixel size | feature not registered | feature not registered |
| Autofocus | Autofocus | Autofocus |
| Touch focus | Supported | Supported |
| Image stabilization | feature not registered | feature not registered |
| Zoom | Only digital zoom | Only digital zoom |
| Face/smile detection | Face detection, Smile detection | Face detection, Smile detection |
| BSI sensor | Not supported | Not supported |
| HDR | HDR photo only main camera | HDR photo only main camera |
| Camera extras | feature not registered | feature not registered |
📸 Front camera | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| Front camera (secondary) | 1.3 megapixels | 5 megapixels |
| Front camera resolution | 1280x1024 pixels | 2592x1944 pixels |
| Video recording (secondary) | VGA (640x480) | HD (1280x720) |
| Front flash | Not supported | LED |
| Focal aperture | feature not registered | feature not registered |
| Focal length | feature not registered | feature not registered |
| Sensor size | feature not registered | feature not registered |
| Pixel size | feature not registered | feature not registered |
🔉 Sound and multimedia | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| Loudspeaker | Supported | Supported |
| Active noise cancellation | Not supported | Not supported |
| Radio | Not supported | FM |
| TV | Not supported | Not supported |
| Video formats | MP4, H.264, H.263 | MP4, H.264, H.263 |
| Audio formats | MP3, WAV, eAAC+ | MP3, WAV, eAAC+ |
🔌 Connectivity | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| USB | MicroUSB 2.0 | MicroUSB 2.0 |
| Audio output | 3.5mm jack | 3.5mm jack |
| TV output | Not supported | Not supported |
| Bluetooth | 4.0 + A2DP | 4.0 + A2DP |
| WiFi | 802.11 b/g/n [wifi4] (2.4GHz) | 802.11 b/g/n [wifi4] (2.4GHz) WiFi Direct, hotspot |
| DLNA | Not supported | Not supported |
| GPS | A-GPS, GeoTagging | A-GPS, GeoTagging |
| NFC | Supported | Not supported |
| Infrared port | Not supported | Not supported |
🧭 Sensors | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| Sensors | Accelerometer Ambient light sensor Barometer Compass Proximity sensor | Accelerometer Ambient light sensor Compass Proximity sensor |
| Vibrating alert | Supported | Supported |
🔋 Battery | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| Battery type | Li-Ion: lithium-ion (Removable) | LiPo: li-ion polymer (Removable) |
| Battery capacity | 2500 mAh | 2820 mAh |
| Charger, watts | Wired charging | Wired charging |
| Inductive / wireless charging | feature not registered | feature not registered |
| Talk time autonomy | 16.7 hours | 19 hours |
| Standby | feature not registered | 408 hours (17 days) |
➕ Other features | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| Call control | Voice recorder | Voice dialing, Voice recorder |
| Messaging | SMS (T9), MMS, E-mail, Push mail | SMS (T9), MMS, E-mail, Push mail |
| Hands-free calling | Supported | Supported |
| Video calling | Supported | Supported |
| Ringtones | Polyphonic and customized | Polyphonic and customized |
| Web browser | HTML, XHTML, HTML5 | HTML, XHTML, HTML5 |
| Antenna | Internal antenna | Internal antenna |
| Qwerty physical keyboard | Not supported | Not supported |
| Miscellaneous | • Colors: Black • Push-to-talk • HAC M4/T3 • WiFi hotspot • IP67 certified dust tight and water proof up to 1m for 30min • Military 810G certified for shock, temperature extremes, vibration, blowing rain, humidity, low pressure and long solar radiation exposure Java framework | • Colors: Black, White, Chocolate, Blue, Red • USB OTG On-The-Go |
☢️ Radiation rate | ||
| Kyocera Torque XT (E6715) | Wiko Pulp Fab (3G) | |
| SAR 1.6W/kg (USA, Mexico, etc.) | feature not registered | feature not registered |
| SAR 2W/kg (Europe, UK, etc.) | feature not registered | 0.25W/kg (head), 0.27W/kg (body) |